Beaulieu
Beaulieu 4008 rewind button
Brand Beaulieu
Overexposure length 100 frames
Dimensions 3x1.5cm
Weight 20g
Original Beaulieu rewind button. This accessory is intended for creating superimpositions and cross-fades. It can only be operated after briefly pressing the film advance lock button. It must be screwed into the sound sync socket. It consists mainly of two concentric rings: a knurled black ring; and a black ring with shiny notches.
The knurled ring is used to tighten the device in the M' sound sync socket, while the notched ring is intended to manually advance the film in reverse. This ring has two engagement positions:
a) engaged: when it is away from the knurled ring
b) disengaged: when it is pushed against the knurled ring
Mounting the rewind device:
- Align the shaft key with the sound sync shaft slot
- Screw the device (clockwise)
- Engage the notched ring, then lock the device by turning the knurled ring.
When you are not using the device, the notched ring must be disengaged; otherwise, the battery life would be considerably reduced.
Important:
Do not exceed 100 frames (for example 5 seconds at 18 frames per second; 4 seconds at 25 frames per second) by holding down the film advance lock button.
Do not press the film advance lock button when using the camera at speeds higher than 25 frames per second.
How to achieve a superimposition effect:
Superimposition is intended to create a transition from one scene to the next by superimposing the beginning of one scene on the end of the previous one. End of a scene: (100 frames maximum)
- simultaneously - block the film advance by pressing the I advance lock button
- without interruption - place the T variable shutter lever in the semi-closed position lock the T lever in the semi-closed position
- finish the scene and stop shooting
Close the shutter by placing the T lever in the extreme forward position
and lock it
- lock the three-position D power switch in the safety position
lock the E shutter release in the continuous shooting position. Engage the notched ring of the rewind device. Turn the notched ring clockwise. The pressure exerted by the fingers on the notched ring must be just enough to allow the film to run in reverse, turning until the fingers slip around the ring. Release the E shutter release button
- Set the D switch to the desired position
Beginning of the next scene:
- Release the T lever, return it to the semi-closed position and lock it
- Start shooting
- Without interruption, release and return the T lever to the extreme rear position after a period of time equal to that of the previous scene's shooting with the lever in the semi-closed position.